The 16D959565A mirror switch has more to match than the round knob you see from the driver's seat. In the product gallery, that knob sits in an angled faceplate with markings around it, while the rear and side views show the housing that must fit into the trim. A useful buying check compares those views separately. Start with the full part reference, choose the photo that answers each question, and leave electrical or fitment details open until you have evidence for them.
What the 16D959565A mirror switch listing tells you
The 16D959565A mirror switch product page identifies a mirror switch, lists Volkswagen Jetta as the application, and specifies one switch in the package. That gives you a reference and a quantity to check against your repair notes. It does not mean every Jetta version uses the same switch. A trim level, equipment option, or different original reference can change the part needed. Check the number on the original unit or ask for a vehicle-specific lookup before ordering.
Keep the final A when recording the number. Search results sometimes place similar references together, and a match on only the first part of a number can be misleading. If you have a number printed on a bag or written on a repair estimate, note where it came from. That makes it easier to distinguish a store or invoice identifier from the number meant to identify the original component.
Compare the markings without assuming a feature upgrade
The face photo shows L, 0, and R markings around the dial, plus two pictograms on the right. If you're comparing from the driver's seat, take a well-lit photo of your original switch from directly above the face and note which markings are present. A worn symbol may be hard to see in the car. A photo from a different angle can help reveal it without guessing what it once said.
Treat the markings as identification clues, not a promise about what your vehicle will do once the switch is fitted. If the old switch lacks a symbol shown here, do not order on the assumption that the new dial adds that feature. Check the vehicle equipment, the original reference, and the intended switch before buying. The gallery shows the markings on the pictured part; it is not a description of how every trim is wired.
Match the faceplate and the space behind it
Next, compare the outside edge of the faceplate to your original. In the listing's front view, the dial is set into a faceplate with slanted sides. The edge that sits next to the interior trim matters even if the rotary knob looks familiar. On your photo, include a little of the surrounding trim so you can tell which way the switch sits and which edges need to align.
If the original switch is already accessible, compare the rear of the housing and the location of the retaining features. A front photo does not establish how far the housing extends behind the panel or how it attaches. If clearance or a dimension is important to the selection, measure the original and ask for the corresponding measurement; do not infer it from the displayed size of an online photo. If removal is required just to see the back, ask a technician for that comparison rather than prying at the trim for a picture.
Check the connector from its mating end
The side view gives you a better look at the connector opening than the face photo does. For the comparison, take or request a matching image of the original opening, with the latch or guide at the same orientation. Look for the shape of the opening, the position of the guides, and where contacts are visible. A similar shell alone is not proof of matching terminal positions. An angled photo also can hide contacts, so request a clearer view if a detail cannot be seen.
A physical comparison does not confirm a wiring diagram or prove that both switches behave the same in a particular vehicle. If the plug shape or the visible layout is different, ask about the difference with both photos in hand. Do not plan to force a connector or modify it on the assumption that a close match will work.
Ask for the component you actually need
Door controls can appear together in a parts search even though they serve different purposes. The separate 83071-FJ110 power window switch listing, for example, is a window control for a different listed vehicle, not a replacement for the 16D959565A mirror switch. The Lighting & Electrical collection groups products for browsing; it does not establish compatibility between listings.
If the symptom is a mirror that does not move, a product photograph cannot tell you what failed. Have the issue checked before selecting a part. Once the needed component is identified, confirm whether the job calls for a single switch or for additional items the listing does not include. The 16D959565A page identifies one mirror switch and does not promise a complete set of door controls.
Send a short, specific fitment question
When requesting help, provide the product link, complete original reference, vehicle details, and clear photos of the face and connector. Name the feature that remains in question. For instance, say whether the original dial has fewer markings or the plug opening has a guide in another spot. If the original number cannot be read, say so instead of filling in a suffix from another listing.
To choose a 16D959565A mirror switch with confidence, compare the dial markings, trim fit, and connector as separate checks. Use a vehicle-specific reference to tie them together. If one detail remains unresolved, answer that question before checkout rather than relying on a similar-looking switch.



