The VW Skoda roof console light kit combines two related interior replacement parts: a roof sunglasses holder referenced as 1KD868837 and a rear reading light referenced as 6Q0947291A. Because the bundle groups parts that each have their own fitment requirements, a vehicle badge or broad year range cannot confirm the complete kit. Before ordering, verify both original OE numbers, connectors, color, mounting points, and vehicle details.
This guide explains what the NexuParts bundle includes and how to check each component independently. The product record specifically warns that the included parts may not fit every vehicle mentioned across the individual component references, so the safest approach is to treat the sunglasses holder and reading light as two separate fitment decisions.
What the VW Skoda Roof Console Light Kit Includes
The bundle contains selected replacement parts for a related Volkswagen or Skoda interior repair or refresh:
- Roof sunglasses holder 1KD868837, referenced for Volkswagen and Skoda applications including Tiguan, Sagitar, Magotan, and others
- Rear reading light 6Q0947291A, referenced for Volkswagen applications including Jetta, Passat, Polo, and others
Review the current bundle photo, price, inventory, and supplied configuration on the VW and Skoda roof console light kit product page. The Shopify SKU is vw-skoda-roof-console-light-kit-1, and the listing shows one bundled product configuration.
Why the Two Parts Must Be Verified Separately
A roof console area can vary by model, model year, trim, market, headliner color, connector, lighting configuration, and installed options. A sunglasses holder that matches the opening does not automatically prove that the reading light also matches the same vehicle. Likewise, a correct reading-light connector does not confirm the holder's color or mounting geometry.
Use a reliable vehicle-specific catalog and the original parts to confirm 1KD868837 and 6Q0947291A independently. If only one number matches, do not assume the other component will fit because both are sold in the same bundle.
VW Skoda Roof Console Light Kit Buying Checklist
1. Record both original part numbers
Inspect the original sunglasses holder and rear reading light for markings. Compare the complete references with 1KD868837 and 6Q0947291A. Every character matters. If one marking is missing, use the VIN and a trusted parts source rather than guessing from the vehicle name.
2. Confirm the exact model, year, and trim
The bundle listing provides broad application references, not a universal fitment chart. Confirm the vehicle model, production year, trim, market, and roof-console equipment. Do not treat a year tag or a model name from one component as proof for the second component.
3. Compare the sunglasses-holder shape
Check the outer dimensions, opening shape, door contour, hinge orientation, latch position, mounting clips, tabs, screw points, and surrounding headliner interface. The holder should match the original opening without cutting, bending, or modifying the roof trim.
4. Compare color and finish
Interior colors can differ across trims and markets. Compare the bundle photo with the original holder, reading-light housing, headliner, and adjacent trim. Screen settings and lighting can affect how a color appears online, so request clarification if the finish is critical.
5. Verify the reading-light connector
Compare plug shape, keying, pin count, latch, and connector orientation. The vehicle harness should align and lock without modification. A housing that fits the roof opening but uses a different electrical connector is not a confirmed match.
6. Compare the reading-light layout
Review the lens arrangement, buttons, icons, bulb or light positions shown, mounting points, and housing shape. Confirm that the product is intended for the same rear reading-light position as the original component.
7. Confirm every supplied piece before disassembly
Use the product photo as the visual reference for the bundle. Before removing vehicle trim, make sure both components are present and match their originals. Do not assume that wiring, bulbs, fasteners, brackets, or unrelated trim pieces are included unless clearly shown and stated.
Symptoms Do Not Confirm Fitment
A broken holder door, worn latch, damaged trim, inoperative reading light, or intermittent switch response may motivate a repair, but none of these issues identifies the correct replacement by itself. Inspect the affected component and diagnose any electrical problem before selecting parts.
If the light does not work, use vehicle-specific service information to check the appropriate circuit, connector, switch, power supply, and related components. Replacing the housing without confirming the cause may leave the original electrical problem unresolved.
Common Ordering Mistakes to Avoid
- Assuming both bundle components fit because one OE number matches
- Ordering by Volkswagen or Skoda model name without checking the exact vehicle
- Ignoring headliner color, housing finish, clips, tabs, or opening shape
- Overlooking the reading-light connector, pin count, or installation position
- Treating an inoperative light as proof that the lamp housing is faulty
- Assuming unpictured wiring, fasteners, bulbs, or trim pieces are included
- Modifying the vehicle or parts before completing a side-by-side comparison
Browse additional replacement products in the All Auto Parts & Accessories collection. Collection placement helps organize products, but each item still requires its own OE-number, connector, color, mounting, and vehicle verification.
Installation Planning
Use service information for the exact vehicle before removing overhead trim. Confirm the correct access method, clip and fastener locations, connector release, electrical precautions, and reassembly procedure. This guide does not establish a universal roof-console installation process.
Place each new component beside its original before installation. Compare the holder reference, dimensions, hinge, latch, clips, finish, and mounting points. Then compare the light reference, connector, pins, housing, lens, controls, and rear installation position. If either component differs, pause and resolve the fitment question.
Frequently Asked Questions
Does the kit fit every Volkswagen or Skoda from the listed years?
No. The product record says compatibility is for reference and that the included parts may not fit every listed vehicle. Confirm each OE number and physical component independently.
Which part numbers are included?
The bundle references roof sunglasses holder 1KD868837 and rear reading light 6Q0947291A.
Can I order if only one number matches?
That does not confirm the full kit. Verify the second component by OE number, connector, dimensions, color, mounting points, and original photos before ordering.
What should I send for fitment help?
Provide the VIN, vehicle year and model, both original part numbers, and clear photos of the holder, reading light, connectors, mounting points, color, and roof opening.
Final Check Before Ordering
Before adding the VW/Skoda roof sunglasses holder and rear reading light bundle to your cart, confirm 1KD868837 and 6Q0947291A separately. Compare the vehicle details, holder shape, color, clips, reading-light connector, pins, controls, and mounting position. When both independent checks agree, you have a stronger basis for choosing the VW Skoda roof console light kit.
Return to the current bundle listing for a final review of the supplied product image and availability before purchase.