A 92225343 window switch search should lead to a careful part comparison, not a purchase based only on the words Holden or Pontiac. The NexuParts listing identifies an aftermarket power window control with that reference, but its vehicle description does not specify a complete model and year application. Before ordering, use your original component to check the number, connector, controls, and mounting position. This guide separates the information actually provided by the listing from the details that still need confirmation for your vehicle.
Start with the 92225343 window switch listing
The 92225343 replacement power window switch is described as a new aftermarket part for Holden Pontiac applications. Its dedicated reference field identifies 92225343, and the package section lists one power window switch. It is not described as an official vehicle-brand product. The compatibility wording should therefore be read as a fitment reference, not a statement about the replacement's manufacturer.
The specification section leaves placement dependent on the original position and product pictures. It does not provide an explicit left or right designation, a numerical pin count, measured dimensions, or a vehicle-year range. Those gaps are important when deciding whether to buy. Do not turn a broad brand description into a specific model claim or assume that an unstated detail must match your current control.
Keep the original reference and store SKU separate
Begin with the complete marking on the original part, if it is available. Photograph it clearly, then write it down without dropping digits. Compare that marking with 92225343 in the product's reference section. If a character is unreadable or the number differs, record the uncertainty instead of filling it in from the listing you hope will fit.
The store SKU is SD-92225343-799987316114. It is useful for locating this exact catalog item, but the trailing digits are not an independently confirmed vehicle-manufacturer reference. In a message to NexuParts, label the store SKU separately from the number found on your original switch. This avoids asking someone to confirm compatibility using an internal listing identifier as though it came from the vehicle.
Use three views to compare the physical part
The control face
Compare the visible controls, their arrangement, markings, and the outline of the surrounding housing. Include the entire face in your reference photo rather than just one button. Note any difference instead of assuming that a similar color or familiar symbol proves a match. A front view is useful, but it cannot answer questions about the connector hidden underneath.
The rear housing and connector
Where safely available, provide a clear rear view showing the plug opening, terminal arrangement, and retaining features. The listing specifically asks buyers to compare plug type and pin count, yet it does not state a number. If the photographs do not make those details clear, request clarification. Do not borrow a pin specification from another product that happens to appear beside this one in search results.
The original mounting location
Take or provide a wider reference view showing where the control belongs, if you can do so safely. Identify the vehicle and intended position in writing as well. This listing does not establish driver-side, passenger-side, front, or rear placement in its specification text. That means position remains a fitment question, not something to infer from the store category or the appearance of the upper panel.
Decide whether your inquiry is ready to send
A useful fitment request brings the evidence together in one message. Include the actual vehicle year and model, the original reference, the installation location, the product link, and the clearest available photos. If you have measured a feature, give the units and describe exactly which part of the housing was measured. An unlabeled number does not establish a dimensional match.
- State what is confirmed: the readable original marking and the vehicle details you know.
- State what is uncertain: an unclear connector view, missing measurement, or different mounting feature.
- Identify the listing by its link and SKU without treating the SKU suffix as another part reference.
- Ask about the specific difference you found rather than asking only whether it fits Holden or Pontiac.
For example, explain that you are comparing the original control with the 92225343 listing and need the mounting position or connector detail confirmed. Attach your actual evidence; do not substitute an application copied from an unrelated listing. If the answer still leaves a physical mismatch unresolved, pause the purchase until that point is clarified.
A symptom explains the search, not the fitment
You may be looking for a switch because a button is cracked, worn, intermittently responsive, or no longer working. The product description discusses replacement in these situations. However, a symptom does not confirm the underlying cause, prove that this reference is correct, or establish that replacing the control will fix the problem.
Keep two separate notes: one describing what the control does, and another identifying the component. If the fault has not been established, obtain qualified assessment before choosing a replacement solely by appearance. This buying guide does not supply removal steps, electrical test values, or a repair guarantee. It helps organize the information needed before a purchase decision.
Browse related controls without assuming interchangeability
Other window controls can be useful comparisons when checking how listings describe position. For example, the 19209382 passenger-side switch listed for Chevrolet explicitly includes a position in its title. That designation belongs to that separate product. It does not establish a position for 92225343, and the two references should not be treated as substitutes.
Use the Lighting & Electrical parts collection to browse other controls when needed, then return to each individual listing for its own details. Shared placement in a collection is a shopping aid, not evidence of shared vehicle compatibility.
Frequently asked questions
Does the package include a pair?
The package description lists one switch. Multiple images show product views and do not establish a multi-piece package. Review the quantity in your cart separately from the contents of each package.
Can I order by the Holden Pontiac description alone?
No detailed model or year coverage is established by that wording. Compare the original reference and physical details, and resolve missing vehicle-specific information before ordering.
What if the original number cannot be read?
Provide the best available photographs and clearly say the marking is unreadable. Ask what additional evidence is needed. A visual resemblance should remain a possible lead rather than a confirmed fit.
When your comparison is ready, revisit the 92225343 window switch product page. Verify the reference, connector, position, and one-switch package, then clarify any remaining discrepancy before checkout.
