The 04465-26420 front brake pad set is listed for Toyota Corolla and Allion applications, but the verified product data does not specify a model year, engine, or trim. That makes careful pre-purchase verification especially important. Before ordering, match the complete OE/OEM number and compare the pad outline, dimensions, slots, tabs, wear-indicator location, axle position, and supplied pieces with the pads being replaced.
This guide explains what the NexuParts listing confirms and how to compare the product without inventing fitment details. Brake work affects vehicle safety, so diagnosis, inspection, and vehicle-specific service information must guide the repair. A vehicle model name or braking symptom alone cannot confirm one exact pad set.
What the 04465-26420 Front Brake Pad Set Includes
The product is identified as a four-piece front brake pad set. Its OE/OEM reference and NexuParts SKU are both 04465-26420. The compatible make listed is Toyota, the models listed are Corolla and Allion, and the position listed is front. You can review the supplied configuration, current photos, price, and availability on the 04465-26420 Toyota front brake pad product page.
The package contains four front brake pads, as shown in the primary image. Product images are the visual reference for the supplied shapes and pieces. Hardware that is not pictured or explicitly stated should not be assumed to be included.
Why Corolla or Allion Is Not Enough to Confirm Fitment
The verified listing names Toyota Corolla and Allion, but it does not provide year, engine, trim, production date, market, caliper, or brake-package details. Vehicles sharing a model name can use different braking components. Use the VIN and a reliable vehicle-specific catalog to confirm 04465-26420 for the exact front axle application.
If the original packaging or removed pad carries a readable reference, compare the complete number. If it does not, obtain the correct catalog information and measure or photograph the original pad. Do not rely on a rough visual resemblance; backing plates can look similar while tabs, slots, dimensions, or wear-indicator positions differ.
04465-26420 Front Brake Pad Verification Checklist
1. Match the complete OE/OEM reference
Confirm 04465-26420 through the original part information or a reliable Toyota-specific reference for the exact vehicle. Compare every digit. Do not treat the related tag 04465-02480 or any other nearby number as automatically interchangeable without verified catalog evidence.
2. Confirm the front axle application
The listing identifies this as a front brake pad set. Verify that the catalog calls for the reference at the front axle of the specific vehicle. Front and rear pads have different roles and physical configurations, and a pad for another position should not be selected by appearance alone.
3. Compare the backing-plate outline
Place the original pad profile next to the current product images. Check the outer contour, corners, curves, ears, and contact points. The backing plate must correspond to the intended caliper and hardware arrangement. If the outline differs, stop and recheck the application.
4. Check length, height, and visible thickness
Use reliable dimensions for the original or cataloged pad and compare them with the supplied configuration shown. Length and height differences can be difficult to judge from a photo without a scale, so obtain measurements when the OE number is uncertain. Do not force a pad into a bracket when its dimensions differ.
5. Compare slots, tabs, and wear-indicator location
Review the position and shape of center slots, mounting tabs, clips, and any visible wear indicator. Check which pad carries each feature and how the four pieces are arranged in the product image. Small differences can distinguish one brake package from another.
6. Confirm the quantity and pictured configuration
The listing includes four pads for the front position. Count the supplied pieces and compare the image arrangement with the set removed from the vehicle. Do not assume that unrelated shims, clips, sensors, or mounting hardware are included unless the product record and images show them.
Diagnose and Inspect Before Ordering
A noise, vibration, warning indicator, pedal concern, or visible wear may justify a brake inspection, but no symptom identifies 04465-26420 by itself. The braking system should be inspected to determine the actual cause and the complete scope of service. Pad selection should follow the confirmed vehicle application and physical configuration.
Inspection may also reveal that other components require attention, but each part must be identified separately. For example, an A1705400917 front ABS wheel speed sensor belongs to a different vehicle application and performs a different function. It is linked as another brake-control-related product, not as an alternative or companion part for the Toyota pad set.
Common Brake Pad Ordering Mistakes
- Ordering by Corolla or Allion model name without confirming the exact vehicle
- Assuming a listed model applies to every year, engine, trim, market, or brake package
- Matching only part of the 04465-26420 reference
- Ignoring backing-plate outline, pad dimensions, slots, tabs, and wear indicators
- Confusing front and rear axle applications
- Assuming unpictured hardware is included
- Using a generic installation procedure instead of vehicle-specific service information
For related browsing, visit the Brake & Control Parts collection. Collection placement can help you find products by system, but it does not establish fitment. Every pad, sensor, switch, or control component still needs its own OE-number and vehicle-specific check.
Installation Planning and Safety
Brake service affects vehicle safety. Before disassembly, obtain service information for the exact vehicle and confirm inspection steps, pad orientation, hardware requirements, installation procedure, tightening specifications, and any bedding or post-service checks required by the applicable instructions. This article does not establish a universal brake-service procedure.
Keep the original pads available until the replacement set has been verified. Compare all four pieces side by side before installation. If the shape, measurements, tabs, slots, wear-indicator location, or supplied configuration differs, pause the work and resolve the fitment question instead of modifying or forcing the parts.
Frequently Asked Questions
Which Toyota vehicles are listed for 04465-26420?
The verified product data lists Toyota Corolla and Allion. It does not specify a year, engine, or trim, so those names alone are not enough to confirm compatibility.
How many brake pads are included?
The package contains four front brake pads, matching the configuration shown in the primary product image.
What physical details should I compare?
Compare the backing-plate outline, pad length and height, slots, tabs, wear-indicator location, visible thickness, and all four supplied pieces. Use measurements when a photo comparison is inconclusive.
Can a braking symptom confirm this pad set?
No. Diagnose and inspect the braking system first. Then confirm the complete OE number, front axle position, physical dimensions, and exact vehicle application.
What information should I send for fitment help?
Provide the product link, VIN, original OE/OEM reference, vehicle year and model, and clear photos or dimensions of the original pads. Include views of the backing plate, slots, tabs, and wear indicator.
Final Check Before Purchase
Before adding the Toyota 04465-26420 four-piece front brake pad set to your cart, confirm the entire OE reference and the exact front axle application. Then compare the original pads with every product image, including shape, length, height, slots, tabs, wear-indicator position, and quantity. When the catalog evidence and physical comparison agree, you have a stronger basis for selecting the correct 04465-26420 front brake pad set.